COME-2000HFD-DU outdoor WiFi6 Directional AP data sheet
COME-2000HFD-DU
- Detail
Directional AP data sheet
Product overview
COME-2000HFD-DU outdoor directional antenna integrated wireless access point (AP) is a wireless access point product of the next generation high-speed wireless network introduced by COMELINK Technology for industry customers. It adopts the latest standard 802.11ax protocol, works in 2.4GHz and 5GHz bands, and adopts technologies such as MU-MIMO, OFDM and 1024QAM modulation and demodulation algorithm, which can support up to 160M channels.
COME-2000HFD-DU outdoor AP fully considers important factors such as wireless network security, radio frequency control, mobile access, quality of service guarantee, seamless roaming, etc., and cooperates with COMELINK wireless controller products or cloud AC products to complete wireless user data forwarding, security and access control.
COME-2000HFD-DU outdoor AP adopts industrial standard components, uses IP67-grade casing, is firm, waterproof and dustproof, and is suitable for extreme outdoor environment, which can effectively avoid outdoor bad weather and environmental impact. At the same time, the built-in outdoor universal directional antenna greatly reduces the difficulty of installation and maintenance, and can meet the outdoor wireless WiFi network coverage under almost all environmental requirements. This product can support remote Ethernet power supply mode, and is especially suitable for deployment in wireless cities, scenic spots, commercial plazas, large campuses, enterprise parks, hospitals and other operational hot spots.
key property
High performance and high reliability wireless network
- WiFi6 high-speed access
The COME-2000HFD-DU wireless access point complies with the new generation WiFi6 protocol standard, backwards compatibility 802.11a/b/g/n/ac/wave2. Support OFDMA scheduling, so that multiple users can receive and send information at the same time, reduce delay and improve network efficiency. It supports 1024QAM modulation, and can support up to 160M channel bandwidth, 2.4G RF rate of 574Mbps, 5G RF rate of 2402Mbps, and the maximum transmission rate of the whole machine of 2.976Gbps, which can provide a higher-speed and high-throughput wireless network and provide higher data throughput for more users in a crowded wireless environment.
- Built-in integrated antenna
COME-2000HFD-DU has a built-in high-gain integrated antenna with an antenna gain of 11dBi, a horizontal lobe width of 65 degrees and a vertical lobe width of 30 degrees, which can meet the coverage of wireless WiFi networks in most outdoor environments and greatly reduce the installation and maintenance costs.
- Provide wired connection with Gigabit Ethernet interface
Gigabit ports are used in the uplink to ensure high-speed wireless transmission. At the same time, it can also use the optical port of AP to transmit through optical fiber, which solves the problem that the network cable can not be transmitted because of the long deployment distance of AP, and provides a smooth upgrade platform for supporting more RF combinations with higher speed in the future. The Ethernet connection port supports power supply through PoE adapter, which makes networking more flexible and convenient.
- Support COMELINK intelligent HAP working mode
For the centralized network architecture of "thin AP+ wireless controller", when the wireless controller goes down, the AP can't work normally, which leads to the paralysis of the whole wireless network. COMELINK wireless AP supports the HAP working mode, which enables the AP to intelligently sense the link. When the wireless controller is found to be down, the AP quickly switches to the independent working mode, continues to forward data, and can support new users to access, thus realizing the high availability of the wireless network and truly ensuring that wireless users never drop off.
- Meet the wide temperature working environment
Through careful hardware design and strict selection of wide temperature devices, COMELINK intelligent wireless AP can meet the working environment of-40 C ~ 60 C.
Secure and controllable wireless network
- Support user isolation policy
Support isolation between wireless users. When this function is enabled, the two wireless clients can't communicate directly, and the wireless clients can only access the upstream wired network, thus realizing a more secure wireless network application.
- Provide fine wireless user management.
Each AP supports up to 16 WLAN, which can realize multi-level and multi-service fine management of wireless users. Each WLAN can realize different access control rights, uplink and downlink rate restrictions, binding with VLAN based on MAC address and IP address, and can realize different authentication and charging strategies. It is very practical to build multiple flexible and scalable wireless networks through the same set of equipment.
- User security access
With the wireless controller, COMELINK intelligent wireless AP can provide a variety of secure access, authentication and accounting mechanisms for different application environments:
- Support Portal/Web authentication, support self-customized Portal content;
- Support MAC address authentication;
- Support SMS authentication;
- Support QR code authentication;
- Support APP authentication;
- Support LDAP authentication;
- Support user's perceptual authentication.
With the popularization and application of various intelligent terminals, wireless terminal users have put forward higher requirements for the ease of use and convenience of authentication mechanisms. Combining the mechanisms of Portal authentication and MAC address authentication, the COMELINKwireless network supports user-imperceptible authentication: the user experience is improved, the first-time user needs to manually perform Portal authentication, and then use imperceptible authentication (automatic authentication); the terminal is well adapted, adapting to most WLAN terminals, without the need to adapt the client; the authentication compatibility is good, and it is compatible with the existing Portal authentication method.
Wireless network with convenient management
- Plug and Play
COMELINK Intelligent Wireless AP can automatically discover COMELINK Wireless Controller, and the wireless network can be enabled without AP configuration. It does not need to change the existing network architecture, and can be seamlessly integrated with existing switches, firewalls, authentication servers and other network architectures.
With the cooperation of COMELINK Wireless Controller, COMELINK Intelligent Wireless AP can achieve plug and play, AP zero configuration, and the management, control and configuration of AP equipment are all completed by the wireless controller. Network management personnel no longer need to manage and maintain a large number of wireless APs separately. All configuration, firmware upgrades, security policy updates and other actions can be uniformly issued through the wireless controller.
- Gateway function, remote deployment across the public network
Supports NAT gateway function and DHCP server function. When remotely deploying wireless networks, branches can directly connect to the Internet through the three methods of PPPoE dial-up, fixed IP and DHCP provided by AP, reducing network construction costs.
- Gateway function, remote deployment across the public network
It supports NAT gateway function and DHCP server function. When branch offices deploy wireless networks remotely, they can directly connect to the Internet through PPPoE dial-up, fixed IP, and DHCP provided by AP, thereby reducing network construction costs.
- Support Fat/Fit modes
Supports Fat and Fit working modes, and can flexibly switch between Fat and Fit working modes according to the needs of network planning. As the application mode of Fit AP, it is centrally managed by the wireless controller, and the status of all devices is clear at a glance, which greatly facilitates the system administrator to manage the entire network.
- Radio frequency is shut down at a fixed time to protect network security and be environmentally friendly
It supports timing turning off and on the radio frequency based on time periods. The wireless network can be automatically turned off at night or on weekends to prevent bad guys from invading the network late at night, while reducing the energy consumption of the equipment.
Product Specifications
Hardware specifications
project |
COME-2000HFD-DU |
Size (mm) |
270x270x70mm |
peripheral interface |
1 Gigabit Ethernet port; 1 Gigabit SFP optical port |
power supply mode |
PoE:802.3at |
Overall speed |
2.976Gbps |
Radio frequency design |
2.4G:2x2; 5G:2x2 |
wireless fidelity |
Support 802.11a/b/g/n/ac Wave2/ax standard. |
Antenna parameters |
Built-in directional integrated antenna with gain of 11dBi. |
Working frequency band |
2.4GHz and 5GHz |
Single frequency maximum speed |
2.4G:574Mbps; 5G:2402Mbps |
Transmit power |
Single-channel RF port can support up to 24dBm with adjustable power granularity of 1dBm. |
Operating temperature/storage temperature |
-20°C~50°C/-45°C~70°C |
Working humidity/storage humidity |
5% ~ 95% without condensation |
the protection grades |
IP67 |
Radio frequency regulations |
Model approval of wireless transmitting equipment of Ministry of Industry and Information Technology |
Software Specifications
project |
trait |
COME-2000HFD-DU |
WLAN characteristics |
Product positioning |
Outdoor directional antenna integrated 11ax access point |
Working frequency band |
2.4GHz and 5GHz |
|
Maximum number of access users |
256 (The actual number of users varies due to factors such as application environment) |
|
Virtual AP |
16 |
|
Number of spatial streams |
2.4G RF: 2 spatial streams 5G RF: 2 spatial streams |
|
Automatic channel adjustment (DCA) |
support |
|
Automatic power control (TPC) |
support |
|
Hide SSID |
support |
|
Chinese SSID |
support |
|
Multi-country code deployment |
support |
|
Radio frequency timing switch |
support |
|
Access user number limit |
support |
|
Link integrity detection |
support |
|
Forced roaming of weak signal terminal |
support |
|
11ac, 11ax characteristics |
40MHz bundling |
support |
80MHz bundling |
support |
|
160MHz bundling |
support |
|
OFDMA |
support |
|
1024QAM |
support |
|
MU-MIMO |
support |
|
Frame aggregation (A-MPDU) |
support |
|
Maximum similarity demodulation (MLD) |
support |
|
Beam switching shaping (TxBF) |
support |
|
Maximum combining ratio reception (MRC) |
support |
|
Space-time block code (STBC) |
support |
|
Low density parity-check coding (LDPC) |
support |
|
Safety characteristics |
encrypt |
Support 64/128WEP, TKIP and CCMP encryption. |
802.11i |
Support WPA-PSK, WPA2-PSK, WPA, WPA2. |
|
MAC address filtering |
support |
|
Anti-DOS attack |
support |
|
User isolation |
support |
|
Broadcast storm suppression |
support |
|
Cable-side ARP suppression |
support |
|
Network characteristics |
WAN uplink |
Support static IP address, dynamic DHCP to obtain IP, PPPoE dialing. |
VLAN |
support |
|
AC automatic discovery |
Support DHCP discovery, DNS discovery, broadcast discovery and static IP discovery. |
|
Local forwarding |
support |
|
Centralized forwarding |
support |
|
Uplink integrity detection |
support |
|
CAPWAP link detection |
support |
|
DHCP Server |
support |
|
roam |
Support fast roaming |
|
quality of service |
WMM |
support |
User number limit |
support |
|
Bandwidth limitation |
support |
|
Intelligent HAP working mode |
support |
|
Management characteristics |
administration of networks |
Support AC centralized management, support fat and thin two modes. |
Maintenance mode |
Support local maintenance and remote maintenance (support SSH, Telnet and Web). |
|
Configuration management mode |
Support HTTP/HTTPS/CLI. |
|
Log function |
support |
|
statistical information |
support |
|
NTP Client |
support |
|
Fat/Fit mode switching |
support |
|
Watch dog |
support |