COMELINK 1 PON 4 LAN 2 WIFI 1USD 1TEL 1DC Port 1ON OFF Switch Fiber Optical Equipment GEPON ONU

COME-GPE550 ✦ PON: connect the OLT equipment at the source end through the optical fiber line ✦ Ethernet port: connected to user side equipment through twisted pair network cable, lan1 port speed is 10 / 100 / 1000m, adaptive, lan2-lan4 Port rate is 10 / 100M adaptive ✦ Telephone port: connected to user side equipment through telephone line ✦ Reset button: restart the equipment; Press and hold for more than 3 seconds and the system will return to the factory default ✦ WiFi button: wireless routing function on / off ✦ WPS button: WPS is used to simplify Wi Fi wireless security settings and network management, that is, Wi Fi protection settings, which you can set according to the client Support and select the appropriate mode ✦ Led button: LED indicator on / off ✦ Power switch: power on / off ✦ Power interface: connected to external power supply

  • Detail

Product descriptions from the supplier

Overview
Products Description
Product features:
➤ Comply with ITU-T g.984 standard
➤ Comply with H.248, MGCP and SIP protocol standards
➤ Comply with 802.11 n / B / g protocol standard
➤ It supports layer 2 switching of Ethernet services and line speed forwarding of uplink and downlink services
➤ Support frame filtering and suppression
➤ Support the standard 802.1Q VLAN function and VLAN conversion
➤ 4094 VLANs supported
➤ Support dynamic bandwidth allocation
➤ Support PPPoE, ipoe, bridge and other services
➤ Support QoS, including service flow classification, priority marking, queuing and scheduling, traffic shaping and traffic control
➤ Support 2.6.3 IgM snooping
➤ Support Ethernet port speed limit, loop detection and layer-2 isolation
➤ Support power failure alarm
➤ Support remote reset and restart functions
➤ Support the function of restoring factory parameters
➤ Support data encryption
➤ Support status detection and fault reporting
➤ Support power lightning protection
➤ support GPON / EPON dual mode
Port characteristics:
✦ PON: connect the OLT equipment at the source end through the optical fiber line
✦ Ethernet port: connected to user side equipment through twisted pair network cable, lan1 port speed is 10 / 100 / 1000m, adaptive, lan2-lan4 Port rate is 10 / 100M adaptive
✦ Telephone port: connected to user side equipment through telephone line
✦ Reset button: restart the equipment; Press and hold for more than 3 seconds and the system will return to the factory default
✦ WiFi button: wireless routing function on / off
✦ WPS button: WPS is used to simplify Wi Fi wireless security settings and network management, that is, Wi Fi protection settings, which you can set according to the client Support and select the appropriate mode
✦ Led button: LED indicator on / off
✦ Power switch: power on / off
✦ Power interface: connected to external power supply
Optical properties:
♣support wavelength division multiplexing technology, single fiber dual wave bidirectional transmission ♣ interface type: SC / APC
♣ maximum spectral ratio: 1:128
♣ rate: uplink 1.25gbps, downlink 2.5Gbps
♣ transmission wavelength: 1310 nm
♣ receiving wavelength: 1490 NM
♣ output optical power: - 1 ~ + 4dbm
♣ receiving sensitivity: < - 27dBm
♣ The longest distance between OLT and ONU is 20km
Physical properties: ♠ Power supply: 12V / 1A
♠ Operating temperature: - 5 ~ 55 ℃
♠ Storage temperature: - 40 ° ~ 70 °
♠Chassis specification: 150 * 115 * 35mm (length * width * height)
DDR
256M
FLASH
4GB（4096*8bit）
Optical fiber interface
1 SC / APC fiber port
Ethernet interface
1 x 10 / 100 / 1000m adaptive port (RJ45)
3 x 10 / 100M adaptive ports (RJ45)
Telephone interface
1 4-core telephone port
Wireless WiFi
2 external antennas
IEEE 802.11b/g/n compliant
2.4GHz wireless network
USB port
1 USB 2.0 port
Company Profile